Optimization of Quartz Sand Leaching Process Using Design Experiments Method (DOE) - Archive ouverte HAL Access content directly
Journal Articles Silicon Year : 2019

Optimization of Quartz Sand Leaching Process Using Design Experiments Method (DOE)

, , , (1)
1

Abstract

The present study aims at investigating the Algerian quartz sand from Djelfa deposit as a potential source to produce silicon. The sand from the Djelfa deposit has a high concentration but not enough to be used as raw material for pyrometallurgy (97%) of SiO2. Therefore, the quartz was treated using acid leaching process to increase the silica concentration up to 98.5%. Otherwise, we employ Design of Experiments Method Software (DOE) as numerical model to optimize the parameters of leaching and also to predict the etching behavior of sand grains during the primary step of the process. The results show that the effect of acid concentration has more influence than the grains particle sizes and leaching time to obtain the required silica purity. Using DOE numerical method in the first step of leaching, optimal response of purity (ΔP)(ΔP)\\left (\\mathrm \\\\Delta \ P\ \\right ) about 98.48% is obtained. In this context, the optimal grain sizes of sand and the optimal acid concentration are respectively, 276.9 \textmum and 21.15%, for 6 hours leaching time. The obtained response is very close to the experimental values and can be used for the next stage of the silicon production chain.

Keywords

Not file

Dates and versions

hal-02358949 , version 1 (12-11-2019)

Identifiers

Cite

A. Kefaifi, T. Sahraoui, A. Kheloufi, Ema Bobocioiu. Optimization of Quartz Sand Leaching Process Using Design Experiments Method (DOE). Silicon, 2019, 11 (3), pp.1481--1488. ⟨10.1007/s12633-018-9966-1⟩. ⟨hal-02358949⟩
24 View
0 Download

Altmetric

Share

Gmail Facebook Twitter LinkedIn More